jason.lee@pinghui-cn.com
+86-519-86652021
中文版
Home
About
Company Profile
Certifications
Plant Equipment
Products
Roller
Fabric Embossing Machine
Metal Embossing Machine Line
News
Company News
Industry News
Case
Contact
Contact Details
Client Feedback
Knowledge
How are embossing rollers made?
Dec 27,2022
1.Undercutting:Seamless steel tube is used for steel pipe, and 45# round steel and flange at both ends are used for shaft head. 2.Turning processing:Turning processing roller body. The end plate and the cooperation part of the shaft head number combined surface.
How to properly maintain embossing rollers
The embossing roller must be cleaned after each day's use and then stored in a special storage area.
Comparison of embossing roller cleaning methods
After a long period of use, the paper embossing rollers are often in contact with the ink, resulting in a lot of ink on the surface of the embossing rollers, so cleaning and maintenance measures must be taken, otherwise the efficiency of the paper embossing rollers will be reduced and the performance will no longer be stable.
A new process for simultaneous nonwoven embossing and nonwoven perforation
The main solution is to separate the levels of the needle punch pattern and the embossed pattern when carving, to carve a steel roller with two different levels of texture through CNC technology, to emboss and perforate in a steel-to-steel concave-convex way, to pierce the non-woven fabric and at the same time to complete the embossing at the same time, to improve efficiency and to increase the yield. The embossed pattern is clear, the perforated holes are complete and the embossed and perforated nonwoven is soft, mainly for the new technology of heat-sealed nonwoven perforation and embossing a leap forward reform.
Cautions and solutions for material wrinkling during embossing on embossing machines
If the paper is wrinkled during embossing, stop and check immediately!
New technology for embossing machines across the reform
When embossing on an ordinary embossing machine, if the thickness of the board or material is inconsistent, the embossed texture will be inconsistent in depth. The intelligent embossing system will solve this problem, for example: the thickness of the first board is 25mm, the thickness of the second board is 24mm, when the second board is embossed through, the pressure system will automatically make up the pressure. If the third board is back to 25mm, the pressure system will automatically unload the pressure, so that the embossed pattern maintains a uniform depth.
Contact us
+86-18662294367
Copyright © 2022 Changzhou Pinghui Machinery Co., Ltd
Poweredby:300.cn | SEO